• Install the server in the rack, if necessary.
• Install the server blade in the enclosure.
14. Power up the server.
a. Connect the power cords.
b. Press the Power On/Standby button.
The installation is complete.
Installing the HPE Smart Storage Battery
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal
system components to cool before touching them.
Procedure
1. Observe the following alerts:
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal
system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
2. Back up all server data.
3. Power down the server (Power down the server on page 20).
4. Extend the chassis from the rack (Extending the chassis from the rack on page 20).
5. Remove the access panel (Removing the access panel on page 23).
6. Remove the fan cage (Removing the fan cage on page 23).
7. Install the Smart Storage Battery, and then connect the cable.
64 Installing the HPE Smart Storage Battery
To Next Page
Loading...
