To Next Page

To Previous Page

Installation

Precautions

Save these instructions. This document contains important safety instructions that must be followed during

installation, operation, and maintenance of the UPS and batteries.

WARNING: A risk of personal injury from electric shock and hazardous energy levels exists. The

installation of options and routine maintenance and service of this product must be performed by

individuals who are knowledgeable about the procedures, precautions, and hazards associated with AC

power products.

48 106

This symbol indicates that the UPS exceeds the recommended weight for one

individual to handle safely.

68 150

This symbol indicates that the ERM exceeds the recommended weight for one

individual to handle safely.

WARNING: To reduce the risk of personal injury or damage to the equipment, observe local

occupational health and safety requirements and guidelines for manual material handling.

WARNING: To prevent personal injury from earth conductor leakage current:

• Do not operate the UPS while disconnected from the utility power source.

• Disconnect load devices before disconnecting the UPS from the utility power source.

Preparing to install the hardware

Before installing the hardware:

1. Be sure the necessary tools and materials are available.

2. Select an installation site.

3. Prepare the equipment for installation in the rack.

Tools and materials

The following tools are required for installation:

Phillips screwdriver

The following items are supplied with the UPS:

Installation 13

Other manuals for HPE G2 R5000

Questions and Answers:

Need help?

Do you have a question about the HPE G2 R5000 and is the answer not in the manual?

General