NOTE: Image may dier from actual product.
NOTE: Be sure that you install the SFP28 card into a slot that allows the cable to make connection to the ALOM
module.
11. Install the PCIe riser cage into the server.
CAUTION: Do not twist the cable service loop during installation.
NOTE: Image may dier from actual product.
12. Remove the shipping cap from the auxiliary cable.
13. Connect the auxiliary cable to the SFP28 card:
a. Align the connector keying posts to the SFP28 card.
b. Secure the auxiliary cable to the SFP28 card using a Phillips screwdriver.
NOTE: The PCIe riser cage is not shown in this illustration for clarity purposes.
Hardware options installation 129
To Next Page
Loading...
