Procedure
1. Press the Power On/Standby button.
2. Do one of the following:
• To enter the UEFI System Utilities screen and modify the server configuration ROM default settings, press the F9
key on the ProLiant POST screen. Choose one of the following boot modes:
◦ Legacy BIOS
◦ UEFI (default)
• If you do not need to modify the server configuration and are ready to install the system software, press the F10
key to access Intelligent Provisioning.
For more information on automatic configuration, see the UEFI documentation on the
Hewlett Packard Enterprise
website.
Registering the server
To experience quicker service and more eicient support, register the product at the Hewlett Packard Enterprise
Product Registration website.
Setup 47
To Next Page
Loading...
