ItemItem DescriptionDescription
1 Processor-heatsink module
2 Anti-tilt wires
3 Processor carrier release tabs
4 Bolster plate guide posts
5 Bolster plate
6 Heatsink screws
This module consists of the heatsink attached to the processor that is already secured in its carrier.
M.2 SSD numberingM.2 SSD numbering
The server has two M.2 slots on the system board. These slots support NVMe and SATA SSDs in 2280 and 22110 form factors .
Mixed SSD type configuration is not supported.
1
1
To Next Page
Loading...
