ProLiant servers. To access Intelligent Provisioning, during the server boot process, press F10F10. For more information, see the
Intelligent Provisioning user guide at https://www.hpe.com/info/intelligentprovisioning/docshttps://www.hpe.com/info/intelligentprovisioning/docs.
Download the Service Pack for ProLiant (SPP) —SPP is a comprehensive system software and firmware update solution that is
delivered as a single ISO image. This solution uses Smart Update Manager (SUM) as the deployment tool.
The preferred method for downloading an SPP is by creating an SPP custom download at
https://www.hpe.com/servers/spp/customhttps://www.hpe.com/servers/spp/custom.
This option reduces the size of the SPP by excluding firmware and drivers for OS and server models that are not needed.
The SPP is also available for download from the SPP download page at https://www.hpe.com/servers/spp/downloadhttps://www.hpe.com/servers/spp/download.
Verify that your OS or virtualization software is supported:
https://www.hpe.com/support/Servers-Certification-Matriceshttps://www.hpe.com/support/Servers-Certification-Matrices
The embedded Intel Virtual RAID on CPU (Intel VROC) provides enterprise-level hybrid RAID support. Note the following information:
Intel VROC provides RAID support for direct attached SATA and NVMe SSDs.
The VROC RAID volume must use drives of the same form factor.
Intel VROC requires the server boot mode to be set to UEFI Mode.
In the pre-OS environment, use UEFI System Utilities to enable Intel VROC and create a VROC RAID volume. This task is not
supported in Intelligent Provisioning.
Intel VROC supports RAID management though the following tools:
Non-OS specific: UEFI System Utilities
Windows: Intel VROC GUI, Intel VROC CLI
Linux: mdadm CLI
For more information on Intel VROC features and configuration, see the Intel Virtual RAID on CPU for HPE Gen11 User Guide:
https://hpe.com/support/VROC-Gen11-UGhttps://hpe.com/support/VROC-Gen11-UG
Read the Operational requirements for the server.
Read the safety and compliance information:
https://www.hpe.com/support/safety-compliance-enterpriseproductshttps://www.hpe.com/support/safety-compliance-enterpriseproducts
Take note of the iLO hostname and default login credentials on the serial number / iLO information pull tab.
ProcedureProcedure
1. Unbox the server and verify the contents:
Server
Power cord
Rack-mounting hardware (optional)
Printed setup documentation
The server does not ship with OS media. All system software and firmware is preloaded on the server.
2. (Optional) Install the hardware options.
3. Select the server orientation:
Tower orientation: Connect the peripheral cables and power cord.
Rack orientation: Install the tower-to-rack conversion kit.
4. Decide how to manage the server:
Locally: Use a KVM switch or a connect a keyboard, monitor, and mouse.
-
-
-
-
-
To Next Page
Loading...
