5. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
6. Make sure that the power supply LED is green.
ResultsResults
The installation is complete.
Tower-to-Tower-to-rackrack conversion kit conversion kit
Use the tower-to-rack conversion kit to switch the tower server to rack mode operation. A rack-mounted server occupies 5.5 U space in the
rack and supports in- rack serviceability for all server components.
Kit contentsKit contents
Left and right rack rail assemblies
Server tray
Cable management arm
Rack rail specificationsRack rail specifications
This server supports the HPE tower-to-rack conversion kit (874578-B211) which has the following specifications:
Type: Ball-bearing (stab-in)
Minimum rail length: 727.50 mm (28.64 in)
Rail adjustable range: 570.00–812.00 mm (22.50–32.00 in)
SubtopicsSubtopics
Installing the tower-to-rack conversion kitInstalling the tower-to-rack conversion kit
To Next Page
Loading...
