Property Description
Teaming Mode The following are the modes of network teaming:
• Switch Independent: In this mode, the switches are not aware that different
interfaces on the server comprise a team. All the teaming is done exclusively
on the server.
• LACP: Link Aggregation Control Protocol (LACP) dynamically identify links that
are connected between the host and a given switch which enables the creation
of the Network Team.
• Static: This is a Switch Dependent mode which requires the switch to
participate in teaming.
Load Balancing Load balancing allows you to manage two or more servers as single cluster. This
action distributes traffic across several servers by using the TCP\IP networking
protocol. The following are the Load Balancing options available:
• Transport Ports
• IP Addresses
• MAC Addresses
• Hyper-V Port
• Dynamic
Team Members
Name Name of the network team member using which the user identifies the network
team member.
State State of the network team member.
Link Speed The speed of the interface.
Administrative Mode The active network traffic uses the network interface, if the administrative mode is
active. If the administrative is Standby, the network interface will be used if there is
any interface failure.
Network Team Interfaces
Name Name of the network team.
State State of the network team.
Link Speed The speed of the interface.
The following operational and informational icons are available in the Network Teams page:
Icon Function Description
Edit Allows the user to change the teaming mode, load balancing and the team
members.
Back
button
Allows the user to go to the network teams home page.
Networking 81
To Next Page
Loading...
