Service: Indicates that the resource is
available to use.
Once the request is received to start a
Network Team Interface, the resource
makes an attempt to bring the interface
online.
Stopping: Indicates that the interface is in
the process of moving to a OK, warning,
critical or unknown state. Interface being
brought to an orderly stop.
Warning ( )
Degraded: Indicates that one of the task
is failed or the element is responding to
commands, but is not running in an
optimal operating state.
Stressed: The element is functioning, but
needs attention.
Critical ( )
Predictive Failure: Element is functioning
nominally but predicting a failure in the
near future.
Error: Indicates that the task is in an
unhealthy state that prevents further
execution.
Non recoverable error: Element is in
non-recoverable error.
Unknown ( )
Lost Communication: Element is known
to exist and has been contacted
successfully in the past, but is currently
unreachable.
Unknown: This indicates the unknown
state of the Network Team Interface. The
unknown error occurs if there is a loss of
communication or if the state of the
Network Team Interface is unknown.
No Contact: The monitoring system has
knowledge of this element, but has never
been able to establish communications
with it.
Connection
Unknown ( )
Unknown: This indicates the unknown
state of the Network Team Interface. The
unknown error occurs if there is a loss of
communication or if the state of the
Network Team Interface is unknown.
Table Continued
Networking 89
To Next Page
Loading...
