HPE StoreEver MSL3040

Configuring additional features
The library has many features to customize it for your organization.
For configuration procedures and troubleshooting information, see the user guide.
Procedure
• Enabling the mailslot.
• Configuring partitioning and additional library parameters using one of the partitioning wizards.
◦ Basic Partition Wizard — Use the Basic Partition Wizard to configure partitions that will have similar
resources or to configure the number of bar code characters to report to the host application and
whether to report them from the left or right end of the label for a library with a single partition.
◦ Expert Partition Wizard — Use the Expert Partition Wizard to configure partitions that will have different
resources or to adjust resource assignments for existing partitions or those partitions created with the
Basic Partition Wizard.
• Modifying the default tape drive settings.
NOTE: When connecting an LTO-7 or later FC tape drive directly to the host, configure the FC port in Loop
mode.
• Enabling and configuring SNMP network management.
• Enabling and configuring Command View TL integration and Data Verification.
• Setting up email event notification.
• Using the MSL Encryption Kit.
Installing the library 33