b. Allow the heatsink to cool.
c. Lift the processor heatsink assembly up and away from the system board.
d. Turn the processor heatsink assembly over and place it on a work surface with the processor facing
up.
e. Install the dust cover each processor socket on the failed system board.
8. Install the processor heatsink assembly:
a. Remove the dust cover.
b. Locate the Pin 1 indicator on the processor frame and the socket.
c. Align the processor heatsink assembly with the alignment posts and gently lower it down until it sits
evenly on the socket.
The heatsink alignment posts are keyed. The processor will only install one way.
A standard heatsink is shown. Your heatsink might look different.
62 Removal and replacement procedures
To Next Page
Loading...
