MINIKEY User Manual Change print settings
Page 45 of 66 HSA SYSTEMS
Make the required changes. Press the green check mark to continue.
Offset
Offset for this pen in the current head. Offset for the first pen will be zero. offset for the
second pen will be the distance from the first nozzle row in the first pen to the first
nozzle row in the second pen. This is typically a distance off 600 pixels.
Overlap
The number of nozzles that are turned off. Will compensate for a small overlap of
nozzles.
Ink supply Size (ml)
How much ink at 100% (full) is available to this pen
Ink warning level
Change this setting if you want the MINIKEY to display a warning when the ink
level(measured in %) is low.
Ink level reset
Reset level of ink to supply size (100%)
Offline
Turn off power on the cartridge
To Next Page
Loading...
Need help?
General
