Analytical index
68
HSD S.p.A. © - H5834D0189IX.fm291119
setting the E-NETx address, 37
setting the RS-485 address, 45
installation area
environmental characteristics, 29
installation environment maximum altitude, 29
installation environment relative humidity, 29
installation environment temperature, 29
L
led diagnostics, 46
lifting, 28
overall dimensions and weight of the packed product,
27
procedure warnings, 27
logic power supply voltage, 25
M
main parts of the servo-motor, 24
maintenance
checking the bolts and the screws, 51
general cleaning, 51
safety warnings, 17
spare parts, 63
manufacturer, 14, 25
logo, 25
manufacturer's address, 25
manufacturer's logo, 25
mechanical data, 56
motor, 24
motor shaft, 24
moving, 28
overall dimensions and weight of the packed product,
27
procedure warnings, 27
N
nominal power supply voltage, 25
nominal speed, 25
O
operating environment, 57
operating temperature, 57
orders and requests for information, 14
overall dimensions, 30, 56
overall dimensions of the packed product, 27
P
packing, 28
overall dimensions and weight of the packed product,
27
storage, 28
preliminary information
documents supplied with the product, 12
EC declaration of conformity, 13
identification of the product and manufacturer, 14
orders and requests for information, 14
risks associated with the use of the product, 18
scope of the manual, 11
signs fixed to the product, 19
symbols used in the manual, 12
warranty, 15
product applications, 23
product code, 25
product revision (product revision number)
product revision number, 25
R
Rated torque, 25
read instructions sign, 25
reducers (see "characteristics of the reducers")
reduction (see "reduction ratio")
Reduction gear, 24
Reduction ratio, 24
regenerative effect on bus DC, 34
replacing
configuration following a replacement, 35
residual risks, 18
risks associated with the use of the product, 18
Prohibitions and risks associated with improper han-
dling and/or use, 18
residual risks, 18
RS-485, 34, 44
RS-485 configuration, 44
running-in, 47
S
S1 (see "technical characteristics")
S1 continuous service (see "technical characteristics")
safety, 17
for installation and spaces, 30
risks associated with the use of the product, 18
safety and information signs, 25
safety regulations, 17
signs fixed to the product, 19
warnings for maintenance, 17
safety and information signs, 19, 25
safety regulations, 17
screw tightening torque, 30
serial number, 25
service centres, 65
servo-motor
applications, 23
CANopen address setting, 43
CANopen configuration, 38
To Next Page
Loading...