Introduction HTC 950 RX
2 1.0
Warning!
This symbol means Warning! and indicates that incorrect use can result in
material damage to the machine or accessories. If you see this symbol next to a
section of text, you must be particularly careful when reading through the text
and not carry out any stages of which you are unsure. This is to protect you and
other users and to avoid damaging the machine or other equipment.
Note!
This symbol means Note! and indicates that material damage can occur if the
machine or its accessories are used incorrectly. If you see this symbol next to a
section of text, you must be particularly careful when reading through the text
and not carry out any stages of which you are unsure. This is to avoid damage
to the machine or other equipment.
Tip!
This symbol means Tip!and indicates that you can get tips and advice on ways
to make operating your machine or associated equipment easier, and to avoid
wear. When you see this symbol you should read the accompanying text to
facilitate your work and increase the service life of the machine.
1.4 Transportation
Note!
The machine cannot be moved manually if the drive wheels are locked and the
radio control activated.
Warning!
Never deactivate the radio control function when you have stopped the machine
on a sloping surface during loading, since the machine can start to roll.
The machine is best transported securely fastened to a pallet.The machine can also be
moved short distances using the inbuilt battery drive. The battery capacity is sufficient
to transport the machine for ca. 30 minutes.
The machine can also be transported by lifting equipment, for example truck of crane,
using the lifting eyes provided. In which case, make sure that the weights are locked in
the forward position and that the handle is in its back position, seeFigure 4-5, page
19andFigure 4-2, page 17.
1.5 On delivery
The following items are included in the delivery. Contact you retailer if anything is
missing.
To Next Page
Loading...
