HTC 950 RX Maintenance and repairs
1.0 33
5 Maintenance and repairs
5.1 General Information
We recommend regular inspections of all seals.
Warning!
Disconnect the electrical supply, when changing tools or repairing the machine.
Warning!
Use protective equipment such as safety shoes, safety goggles, protective
gloves, breathing mask and ear muffs.
Warning!
During electro-welding work on the machine, the radio receiver must always be
disconnected to avoid damage to the receiver's electrical system.
5.2 Cleaning
Warning!
Do not clean the machine using a high-pressure washer. Otherwise moisture
may penetrate electrical elements and damage the machine’s drive system.
• Vacuum the electrical cabinet, if required.
• Always clean the machine after use with a damp sponge or cloth.
5.3 Charging the machine's battery
Warning!
Do not expose the battery to naked flames since this could cause an explosion.
The battery that drives the motors for the machine's drive wheel is charged continuously
as long as the machine is connect to the mains.
5.4 Charging/replacing the radio control unit's batteries
Warning!
Do not expose the batteries to naked flames since this could cause an explosion.
To Next Page
Loading...
