HTC 950 RX - Usage (continued); Access to Grinding Tools

Usage HTC 950 RX
20 1.0
During the exchange of tools and when tools with a high removal rate (T-Rex™) are
used, the weights should be folded back, seeFigure 4-7, page 20.
Figure 4-7. Weights folded back
4.5 Access to grinding tools
Warning!
The tool becomes very hot during use. Tip the machine back and allow it to
stand for a short while. Use protective gloves when removing the tools.
Warning!
Disconnect the electrical supply, when changing tools or repairing the machine.