HTC 950 RX - Page 27

HTC 950 RX Usage
1.0 19
Tip!
We recommend that the weights are folded up during grinding, since if the
grinding pressure is too high and the tool is wrong, it can cause damage to the
machine and the floor.
Warning!
There is a risk of crush injuries when the weights are folded back, since these
are not locked in this position.
To obtain a greater grinding pressure, and thereby increased grinding effect, the weights
are lowered forwards, seeFigure 4-5, page 19.
Figure 4-5. Weights lowered forwards
During normal grinding as well as during transport of the machine, the weights should
be placed in the up position, seeFigure 4-6, page 19.
Figure 4-6. Weights in the up position