HTC 950 RX - Machine Description; General Machine Description

HTC 950 RX Machine description
1.0 9
3 Machine description
3.1 General machine description
HTC 950 RXIs designed for grinding in large spaces. It is used to grind, coarse grind,
prepare and polish concrete, natural stone and terrazzo floors or other materials
specified in this manual or material recommended by HTC. The machine is a perfect
choice for removing coverings and grinding of concrete floors according to the HTC
Superfloor method, which is an environmentally-friendly method for grinding and
polishing concrete floors.
Thanks to the fact the machine can be operated with the help of radio control, the work
is significantly simplified and the grinding time lengthened. Furthermore, the work is
more effective, since the discharging of the dust separator can be performed while the
machine is radio controlled.The machine is also light and easy to transport, load and
unload because of the inbuilt battery operation.
The machine is constructed from a number of main components, see Figure 3-1, page
10 and Figure 3-2, page 11. Since it is equipped with four grinding discs, the
machine is balanced and easy to use, which results in more efficient stripping and better
grinding results. It also has an integrated weight system for adjusting the grinding
pressure, which makes the machine perfect for those with high demands for flexibility.
The handle can be set in a number of different tilt positions. Choose a position that suits
you best, when you want to operate the machinery manually.
The grinding cover has a connection for an external suction hose used for dry grinding.
The machine can easily be equipped with a large number of tools, depending on the
material to be ground. For the different tools, see HTC’s Product Catalogue under the
Grinding Guide tab.
HTC 950 RXcan be equipped with a Mist Cooler system for effective cooling of the
grinding tools. This system enables a very fine water mist to be diffused through a
nozzle onto the floor surface, which cools the tools, making the grinding more effective.