HTC 950 RX - Fitting Grinding Tools

Usage HTC 950 RX
24 1.0
4.6.1 Fitting grinding tools
1. Slide the grinding tool diagonally, from above, down into the appropriate guide
slot on the tool holder, seeFigure 4-12, page 24. Then push the tool fully
into the guide slot.
Figure 4-12. Fitting grinding tools
2. Lock the grinding tool into the tool holder by giving it a few light taps with a
rubber hammer - see Figure 4-13, page 24.
Figure 4-13. Locking grinding tools