HTC 950 RX - Usage (continued); Interrupted Radio Communication and Operation Tips

HTC 950 RX Usage
1.0 31
1. Stop the machine, for how this is done see underStop the machine - Radio
control, page 30.
2. Press and hold in the button to start radio communication.
3. Press on the frequency button "FREQ". The machine's radio receiver
automatically searches for the new frequency, the number of the selected
frequency channel is shown briefly on the radio control unit's display. Press on
the frequency button "FREQ" to see the selected frequency channel while
operating.
Note!
If the error code "Jt" is shown on the display, immediately contact the
HTC Service Centre for instructions.
4. Release the button to start radio communication.
5. Start the machine, for how this is done see underStart the Machine - Radio
Control, page 29.
4.10.5 Interrupted radio communication
If the distance between the machine and the radio control unit becomes too great, the
radio communication will be broken and the machine stops. In order to restart operation
via the radio control unit, follow the instructions underStart the Machine - Radio
Control, page 29.
4.11 Making operation easier
In order to keep the suction hose for the dust extractor and the power cable out of the
working area and/or path of the machine, the hose and cable can be arranged as shown
in the picture below.