HTC 950 RX Usage
1.0 23
5. Lift the machine up as far as you can, lock the weight in its up position. Then
lower the machine completely to the floor, see Figure 4-11, page 23.
Figure 4-11. The machine rests on the floor
4.6 Fitting and replacing grinding tools
Warning!
Disconnect the electrical supply, when changing tools or repairing the machine.
Warning!
The tool becomes very hot during use. Tip the machine back and allow it to
stand for a short while. Use protective gloves when removing the tools.
As the machine is equipped with the patented EZchange tool system, fitting and
replacing grinding tools is quick and easy. The tool system consists of wings on which
diamond grinding tools are fitted without the need for screws.
To Next Page
Loading...
