HTC 950 RX - Page 7

HTC 950 RX Table of contents
iii
6 Faultfinding 36
6.1 General Information ......................................................... 36
6.1.1 The machine will not start ................................... 36
6.1.2 The machine vibrates or wears the tool
unevenly ............................................................. 36
6.1.3 The machine is grinding at an angle .................. 36
6.1.4 The machine stops - manual operation .............. 36
6.1.5 The machine stops - radio control ...................... 36
6.1.6 The fuses trip frequently ..................................... 37
6.1.7 The machine cannot cope .................................. 37
7 Electronic error codes 38
7.1 General Information ......................................................... 38
7.2 Schneider Electric ATV31 ................................................ 38
7.2.1 Resetting the frequency converter ..................... 40
7.2.2 Checking the last error code .............................. 40
7.3 Schneider Electric ATV312 .............................................. 40
7.3.1 Resetting the frequency converter ..................... 41
7.3.2 Checking the last error code .............................. 41
8 Technical data 42
9 Environment 44
10 Warranty and CE marking 45
10.1 Warranty .......................................................................... 45
10.2 CE marking ...................................................................... 45