To Next Page
K
kevin32Sep 5, 2025
How to troubleshoot low control voltage on my HTC DURATIQ T6?
- LladamsSep 5, 2025
To troubleshoot low control voltage on your HTC Floor Machine, check the PSU and the battery voltage.
How to troubleshoot low control voltage on my HTC DURATIQ T6?
To troubleshoot low control voltage on your HTC Floor Machine, check the PSU and the battery voltage.
What does a phase error on the incoming supply mean for my HTC DURATIQ T6?
A phase error on the incoming supply of your HTC Floor Machine means that the incoming supply has lost one or more phases. Check the incoming supply.
How to troubleshoot low voltage to the radio receiver on my HTC Floor Machine?
To troubleshoot low voltage to the radio receiver on your HTC Floor Machine, check the control voltage, battery voltage, and cabling to the radio receiver.
How to troubleshoot low voltage to the left drive motor on my HTC DURATIQ T6 Floor Machine?
To troubleshoot low voltage to the left drive motor on your HTC Floor Machine, check the control voltage, battery voltage, cabling to the drive motors, and voltage on relay outputs.
General| Brand | HTC |
|---|---|
| Model | DURATIQ T6 |
| Category | Floor Machine |
| Language | English |
Explanation of warning symbols and essential safety rules for machine operation.
Details on important safety decals and warnings affixed to the machine.
Data on hand-arm vibrations and sound power levels according to relevant standards.
Diagram and numbering of the Human-Machine Interface (HMI) control panel.
Detailed explanation of each function and button on the control panel.
Visual representation and numbering of the machine's information display panel.
Explanation of the various symbols and their meanings on the information panel.
Description of the data metrics shown on the information panel.
Instructions for adjusting the machine's handle for optimal working height.
Procedure for adjusting the machine's weights to optimize grinding pressure.
How to control machine movement and grinding process using the control panel.
Detailed steps for performing manual grinding operations.
Steps for setting up and pairing the remote control with the machine.
Specific controls for grinding speed, propulsion, and offset via radio.
Common causes and solutions when the machine fails to start.
Troubleshooting for frequent tripping of fuses or earth fault breakers.
Solutions for when the machine cannot cope or performs poorly.
Overview of how warnings and error messages are displayed on the machine.
Explanation of specific warning messages and how to erase them.
Actions to take for various warning messages like voltage or temperature issues.
Explanation of specific error messages and their fault descriptions.
Actions to take for error messages like CAN bus errors or motor faults.
