Charging the battery
Before you turn on and start using HTC Explorer, it is recommended that you charge
the battery.
§ Only the power adapter and USB cable provided in the box must be used to
charge the battery.
§ Do not remove the battery from HTC Explorer while you are charging it using the
power or car adapter.
1. Insert the small end of the USB cable into the USB connector.
2. Insert the other end of the USB cable into the power adapter.
3. Plug in the power adapter to an electrical outlet to start charging the battery.
When you charge the battery and HTC Explorer is on, the charging battery icon is
displayed in the status bar. After the battery has been fully charged, the charging
battery icon turns to a full battery icon . When the display is off, an animated icon
shows the charging status.
As a safety precaution, the battery stops charging when it overheats.
Switching the power on or off
Switching the power on
Press the POWER button. Easy.
When you turn on HTC Explorer for the first time, you’ll need to set it up.
14 Getting started
To Next Page
Loading...
