138 Chapter 9 Bluetooth
5. After the receiving party accepts the partnership, the Bluetooth device name
is shown on your screen, including all Bluetooth services that you can use
with it. Select the check boxes of the Bluetooth services you want to use, and
then tap Done.
6. If you selected to use the Bluetooth Serial Port service of the paired device,
select a local serial port to assign for the paired device, and then tap
Continue.
The connected Bluetooth device now appears in the
Devices tab ( ).
Tip Tap Properties to change the paired device name. Tap Menu > Update to
update the list of services that you can use with the paired device.
Creating a Bluetooth partnership is a one-time process. Once a partnership is
created, your phone and the paired device can recognise the partnership and
exchange information without entering a passcode again.
Accepting a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in visible mode.
2. When prompted, enter or accept the passcode (the same passcode from the
device requesting the partnership) to establish a secure connection.
3. Tap
OK. The paired device now appears in the Devices tab ( ). You can
now exchange information with the paired device.
Tip To delete a Bluetooth partnership, select the device’s name on the Devices tab, then
tap Menu > Delete. When prompted to confirm, tap Yes.
To Next Page
Loading...
Need help?
General
