Chapter 1 Getting Started 31
1.5 Starting Up
After installing your SIM card and battery and charging the battery, you can now
power on and start using your phone.
Turning the power on and off
To turn on the power
Press the END/POWER button.
When you turn on your phone for the first time, Windows Mobile starts up and
prepares your phone for first time use.
To turn off the power
1. If the display is off, press the END/POWER button to turn the display back on.
2. Unlock your phone if the Lock screen is displayed. See “Lock Screen“ for
details.
3. Press and hold END/POWER for a few seconds.
4. On the Quick List screen, tap
Power Off.
Switching to Sleep mode
Briefly press the END/POWER button to turn off the display temporarily and switch
your phone to Sleep mode. Sleep mode suspends your phone to a low power state
while the display is off in order to save battery power.
Your phone automatically goes into Sleep mode when you leave the phone idle
after a certain period of time. You are still able to receive messages and calls while
your phone is in Sleep mode. Your phone wakes up automatically when you have
an incoming call. To wake up your phone manually, press the END/POWER button.
Tip You can set the display timeout period. For instructions, see “To change backlight and
automatic Sleep mode settings” in Chapter 13.
To Next Page
Loading...
Need help?
General
