Table 6-11 Description of a WAN GE combo indicator
Silkscreen Color Description
WAN GE COMBO Green
l Steady on: The WAN GE interface is in
Link-Up state.
l Off: The WAN GE interface is in Link-
Down state.
l Blinking: The WAN GE interface is
transmitting or receiving data.
DC Indicator
Table 6-12 describes the possible states of a DC indicator.
Table 6-12 Description of a DC indicator
Silkscreen
Color Description
DC Green
l Steady on: The router is receiving power
normally from the power source
connected to the corresponding power
socket.
l Off: The router cannot be powered by the
power source connected to the
corresponding power socket, or the
power socket is not connected to any
power source.
NOTE
If the input voltage is below the minimum
operating voltage for the router, the router may
not work normally even though the DC indicator
is on.
PoE Indicator
Table 6-13 describes the possible states of the PoE indicator.
Table 6-13 Description of the PoE indicator
Silkscreen
Color Description
PoE Green Steady on: The PoE power socket is
providing 48 V power supply normally.
Off: The PoE power socket does not provide
48 V power supply normally or is not
connected to any power source.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
6 Appendix
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
131
To Next Page
Loading...
