----End
Assembling the Cord End Terminal and the Power Cable
Context
Figure 6-11 shows the components of a cord end terminal and a power cable.
Figure 6-11 Components of a cord end terminal and a power cable
A. Cord end terminal B. Insulation layer of a power cable C. Conductor of a power cable
Procedure
Step 1 Strip a part of the insulation to expose the cable conductor with a length of L1, as shown in
Figure 6-12. The recommended values of L1 are listed in Table 6-24.
NOTICE
When you strip a power cable, do not damage the conductor of the cable.
Figure 6-12 Stripping a power cable (cord end terminal)
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
6 Appendix
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
142
To Next Page
Loading...
