Context
DANGER
To avoid electric shock, do not connect power cables while the power is on.
NOTICE
Do not power on the router before you finish connecting the power cables.
Tools and Accessories
l ESD wrist strap
l Phillips screwdriver
l Power cable for 25 W open frame power supply (one)
l Power cable for the router (one)
Procedure
Step 1 Verify that the router is reliably grounded.
Step 2 Wear an ESD wrist strap. Ensure that the ESD wrist strap is grounded and in a close contact
with your wrist.
Step 3 Connect power cables.
NOTE
The router does not have a power switch, and its power supply is controlled by the power switch of the
external power supply system.
l Connect the router to an external power supply system.
a. Connect the 4-pin DC connector of the router's power cable to the packet socket on
the router and the other end to an external DC power supply system.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
3 Installing an AR500 Series Industrial Access Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33
To Next Page
Loading...
