l Connect the router to a 25 W open frame power supply.
a. Connect 4-pin DC connector of the router's power cable to the packet socket on the
router, connect the cord end terminals at the other end to a power adapter plate, and
use a Phillips screwdriver to tighten the screws on the power adapter plate.
b. Connect the output terminal of the self-contained power cable of the 25 W open
frame power supply to the power adapter plate.
c. Connect the input terminal of the AC power cable for the 25 W open frame power
supply to the power socket on 25 W open frame power supply, and connect the
power plug at the other end to an AC power source.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
3 Installing an AR500 Series Industrial Access Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
To Next Page
Loading...
