After the router starts, check indicators on the router to check whether the router runs
normally. Figure 3-2 describes the indicator states when the router is running normally.
Figure 3-2 Normal indicator states on the router
Indicator Description
ALM Off: The system is running properly.
PWR Steady green: The system power supply
is normal.
RUN Slow blinking green: The system is
running properly.
l Power off the router.
NOTICE
Powering off the router will interrupt all the services on the router. Exercise caution
when deciding to perform this operation.
Turn off the power switch of the external power supply system.
----End
Follow-up Procedure
After the router starts, you can log in to its CLI to configure, manage, and maintain the router.
For details, see the CLI-based Configuration.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
3 Installing an AR500 Series Industrial Access Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
36
To Next Page
Loading...
