4. Remove the flat-head screwdriver to close the reed so that the bare wire is locked in the
hole.
NOTICE
There must be no exposed metal part at the joints of wire holes and bare wires on the 4-
pin terminal block.
Step 4 Connect the 4-pin AC power cables.
1. Connect the 4-pin terminal block to the AC power socket of the router and push the slide
blocks at two sides of the connector, until you hear a click.
2. Connect cables at the other end to an external AC power supply system.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
4 Installing an AR530 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
78
To Next Page
Loading...
