EasyManua.ls Logo

Huawei EchoLife HG861 - Using the CATV

Huawei EchoLife HG861
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
l Obtaining the IP address through the PPPoE dialup.
NOTE
The service provider determines a specified method.
Step 4 Enjoy the high-speed data service.
Run the Internet explorer (IE) to enjoy surfing on the Internet.
NOTE
l The PC must be installed with an Ethernet card.
l The service provider configures the working parameters of the HG850a remotely and you can enjoy
the plug and play without any configuration.
----End
4.3 Using the CATV
This topic describes how to configure the TV set connected to the HG861 in the downstream
direction.
Procedure
Step 1 Connect the device.
For how to connect the TV set, see 2.3 Installation Guide. Make sure that the TV set is connected
properly.
Step 2 Turn on the power supply.
Power on the HG861 and TV set.
Step 3 Enjoy the high-speed video service.
Watch the program according to the prompt.
----End
EchoLife HG861 GPON Terminal 4 ONT Downstream User Guide
Issue 01 (2009-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-3

Table of Contents

Related product manuals