Huawei eSpace IAD - How Do I View the MAC Address of the IAD; How Do I View the Physical Sequence Number of the IAD; How Do I View the Software Version of the IAD; How Do I View the System Information

eSpace IAD
Troubleshooting
4 FAQs
Issue 02 (2012-02-29)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
100

For IAD101H/102H/104H, use a network cable to connect a PC to the LAN port on the
IAD, and enter telnet 192.168.100.1 in the Run dialog box to log in to the IAD. The
default user name is root, and the default password is admin. In the privilege mode, run
the display ipaddress command to display the IP address. For details, see the eSpce IAD
Product Documentation.
4.1.3 How Do I View the MAC Address of the IAD
Q: How do I view the MAC address of the IAD?
A: You can view the MAC address in either of the following ways:

Log in to the web management system, and choose Basic Configuration > Network
Parameter.

Log in to the CLI, and run the enable and configure terminal commands in sequence to
enter the global configuration mode. Then run the display mac-address command.
IAD101H/102H/104H supports only the CLI mode.
4.1.4 How do I view the physical sequence number of the IAD
Q: How do I view the physical sequence number of the IAD?
A: You can view the physical sequence number in either of the following ways:

Log in to the web management system, and choose Advanced Configuration >
UCEMS Configuration.

Log in to the CLI, and run the enable and configure terminal commands in sequence to
enter the global configuration mode. Then run the display physical-serial-num
command.
IAD101H/102H/104H supports only the CLI mode.
4.1.5 How do I view the software version of the IAD
Q: How do I view the software version of the IAD?
A: You can view the software version in either of the following ways:

Log in to the web management system, and choose Basic Configuration > Version
Information.

Log in to the CLI, and run the enable and configure terminal commands in sequence to
enter the global configuration mode. Then run the display version command.
IAD101H/102H/104H supports only the CLI mode.
4.1.6 How do I view the system information
Q: How do I view the system information?
A: For details, see Maintenance > Viewing the System Information in the eSpce IAD
Product Documentation.