standard. The pre-fab. module uses mature welding technologies in the
industry to implement all-round airtight, dustproof, and waterproof
protection.
● Bulletproof: The bulletproof function can be customized. Customization will
change the structure of the pre-fab. module. Side plates of the pre-fab.
module are 4.2 mm bulletproof steel plates and top plates are 2.4 mm
bulletproof plates. The design meets the GJB 4300-2002 V and N.I.J.0108.01
IIIA standards (distance of 10 m, 56-type 7.62 mm submachine gun or
AK47-7.62X39, initial bullet speed greater than 710 m/s).
● Antiseismic: The pre-fab. module meets GR-63-CORE Zone 3 antiseismic
requirements.
● Theftproof: The intelligent access control system and mechanical locks provide
multifold security protection and can meet class 3 theftproof requirements in
EN 1627–EN 1630 if required.
● Adaptive to environment: The design of two porches prevents sand from
entering the equipment compartment when doors are open during
maintenance, ensuring that the pre-fab. module applies to various harsh
environments.
● Fireproof: The
re extinguishing system is reliable, clean, insulating, and
environment-friendly, and can put out a
re eciently and safely without
damaging equipment, thereby ensuring high equipment availability. The re
extinguishing system uses heptauoropropane as the extinguishing agent and
complies with the EU's CE
certication.
● Certication: The 380 V 2N scenario complies with Uptime Tier III design
certication.
Rapid Deployment
● Streamlined manufacturing, professional division of labor, and good work
conditions ensure that modules and products of the FusionDC1000 are
produced
eciently with strict quality control.
● Infrastructures such as cooling equipment, power supply equipment, and
racks are factory-installed. You only need to provide network cables, power
cables, and water pipes onsite for commissioning.
● System commissioning is completed in factories, and therefore onsite
deployment and equipment room commissioning take less than one week.
● The pre-fab. module can be easily relocated as it can be transported on
level-3 roads and applies to various scenarios such as dynamic data service
deployment, military
aairs, disaster relief, and eld operations.
FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario) 1 Overview
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 2