Figure 5-7 Installing the supercapacitor holder
Step 8 Install the supercapacitor.
1. Push the supercapacitor into the capacitor holder horizontally until the supercapacitor is
secured by the plastic latches. See (1) in Figure 5-8.
2. Connect the cable to the supercapacitor. See (2) in Figure 5-8.
Figure 5-8 Installing the supercapacitor
Step 9 Install the cover.
For details, see 3.6 Installing the Cover.
Step 10 Install the compute node.
For details, see 3.4 Installing a CH121 V5.
Step 11 Power on the compute node.
For details, see 3.2 Power-On Procedure.
----End
FusionServer Pro CH121 V5 Compute Node
User Guide
5 Optional Part Installation
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 100
To Next Page
Loading...
