Figure 5-14 Pasting patterns
2. Use a clean card or blade to smear the thermal compound over the entire center of the
CPU.
The thickness of the thermal compound is about that of a piece of ordinary paper. Ensure
that the thermal compound is evenly and fully coated.
Figure 5-15 Smeared thermal compound layer
Step 12 Install the processor carrier to the heat sink.
1. Aligning the processor corner with a triangle mark with the corner of the heat sink with a
notched triangle, buckle the processor carrier on the heat sink.
FusionServer Pro CH121 V5 Compute Node
User Guide
5 Optional Part Installation
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 106
To Next Page
Loading...
