Figure 5-16 Installing the processor carrier
2. Place the assembled processor and heat sink upside down on the desk, and check that the
processor carrier and the heat sink are firmly secured. If the processor carrier is not
firmly buckled with the heat sink, press the processor carrier to secure it.
Figure 5-17 Checking the assembly
Step 13 Install the processor and heat sink.
1. Remove the processor socket cover.
FusionServer Pro CH121 V5 Compute Node
User Guide
5 Optional Part Installation
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 107
To Next Page
Loading...
