When removing the socket cover, keep it parallel with the board to prevent damage to
pins.
Figure 5-18 Removing the processor socket cover
2. Shine a light at various angles onto the processor socket to check for twisted pins,
foreign matter, and pad damage.
If bent pins or foreign matters are found or the bonding pad is damaged, stop the
operation and contact Huawei technical support.
3. Horizontally holding the processor and heat sink, align the notched corner on the heat
sink with the notched corner on the processor socket, and place the processor and heat
sink downwards on the socket along the guide sleeves.
Keep the processor and heat sink parallel with the mainboard to prevent damage to
processor socket pins.
FusionServer Pro CH121 V5 Compute Node
User Guide
5 Optional Part Installation
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 108
To Next Page
Loading...
