Figure 3-8 Installing a partition board
2. Press the ejector release button on the compute node. See (1) in Figure 3-9.
3. Fully open the ejector lever. See (2) in Figure 3-9.
4. Slide the compute node into the chassis horizontally. See (3) in Figure 3-9.
5. Close the ejector lever. See (4) in Figure 3-9.
Figure 3-9 Installing a compute node
Step 4 Power on the compute node.
For details, see 3.2 Power-On Procedure.
Step 5 Check indicator status.
For details, see 2.1.2 Indicators and Buttons.
----End
FusionServer Pro CH121 V5 Compute Node
User Guide
3 Basic Operations
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 34
To Next Page
Loading...
