Version 2.1 (May 2016) 24
3. Enter your current password, and a new password. Re-enter the new password to
confirm it, and click Save.
Picture 3-8 account management
3.3. Setting Network Access Parameters
3.3.1. Accessing the Network through the Hybrid gateway
When you install the HA35 for the first time, you need to configure the HA35.
To configure the HA35 through the setup wizard, do as follows:
1. Log in to the web management page.
2. Choose Home tab, click Start Wizard.
Picture 3-9 home
3. Enter the parameters provided by your ISP and click Next
•
To protect against unauthorized access, change the password after the first login.
After modifying the password successfully, this page will jump to the login page,
you can use the new password to log in.
• The system will be locked if you enter inco
rrect user name or password three
consecutive times. One minute later, it will be unlocked.
•
If you do not perform any operations after logging in to the system for five minutes, you
will exit the system and the system automatically returns to the login interface.
To Next Page
Loading...
