Version 2.1 (May 2016) 75
11.2. Enabling Wireless Configuration on
Windows
If the setup of the wireless connection between your computer and the HA35 failed, verify
that wireless configuration is enabled on Windows.
On Windows 7 or Windows Vista
1. Right-click Computer and choose Manage from the shortcut menu.
2. In the left panel of the Computer Management window, choose Computer
Management (Local) > Services and Applications > Services.
3. In the right panel of the Computer Management window, right-click WLAN
AutoConfig and choose Properties from the shortcut menu.
4. In the displayed dialog box, check that Service status is Started.
5. Click OK to close the dialog box. Then close the Computer Management window.
11.3. Checking the Computer MAC Address
The MAC address, also known as the physical address, is a unique identifier assigned to a
network adapter. A MAC address contains six groups of two hexadecimal digits, such as
2C-41–38–8D-75–8D. This section demonstrates how to check your computer's MAC
address.
On Windows 7
1. Choose Start > Control Panel > Network and Internet > Network and Sharing
Center > Change adapter settings. Right-click Local Area Connection and choose
Status from the shortcut menu.
Picture 11-7 local area connection
To Next Page
Loading...
