Huawei HA35

Version 2.1 (May 2016) 45
6.5. Configuring the Firewall
The preset protective levels of the firewall are as follows:
Level Description
High
When you set the firewall level of the router to High, only the FTP
packets are allowed to pass through.
Low
When you set the firewall level of the router to Low, the active packets
from the LAN to the WAN are allowed to pass through.
Table 6-1 firewall
6.5.1. Recommended Firewall Level
To better protect your privacy and prevent the HA35 from malicious network attacks, it is
recommended that you set the firewall level to High, so that the LAN computers can only
browse the web and download files using an FTP server, while prohibiting Internet users
access to the HA35.
6.5.2. Configuring the Firewall
The HA35 provides a firewall to help secure its WLAN and any devices connected to it. Set
the firewall level based on site requirements to quickly configure the firewall.
1. Log in to the web management page.
2. Choose Internet tab.
3. In the navigation tree, choose Network Security.
4. Select the Firewall configuration page.
5. In Firewall level, select the firewall level that you prefer according to Table 6-1 firewall .
6. Click Save.