Version 2.1 (May 2016) 66
Picture 10-2 set the DHCP server IP addresses
10.3. RA Settings
Router Advertisement (RA) enables a neighboring computer to quickly determine whether
there is an available router.
1. Log in to the web management page.
2. Choose Home Network tab.
3. In the navigation tree, choose LAN Interface.
4. Select RA Settings configuration page.
5. In RA mode, choose Automatic.
6. In ULA mode, choose Disable, because there is no need to use Unique Local
Addersses (ULA), unless it is really needed in your network.
7. Click Save.
Picture 10-3 RA settings
To Next Page
Loading...
