Version 2.1 (May 2016) 62
2. Enable the samba server.
a. Log in to the web management page.
b. Choose Share > Storage Share.
c. In Service Settings, select Enable SAMBA for samba server.
d. Click Save to save the settings.
Picture 9-5 FTP service settings
3. Set the user name and password of the portable storage device.
a. Select User Settings configuration page, as shown in Picture 9-6 FTP user settings .
b. Click New USB user.
Picture 9-6 FTP user settings
As shown in Picture 9-7 FTP user settings 2, In Username and Password, enter a user
name and password for the samba server, and re-enter the password to confirm it.
c. In Directory mode, choose a file sharing path that is a directory.
d. In Privilege, select the desired right.
e. Click Save to save the settings.
To Next Page
Loading...
