Step 6 Insert the sealing ring into the plastic housing and secure the coupling nut to the
plastic housing.
Figure 5-20 Connecting a sealing ring and a coupling nut
Step 7 Secure the sealing nut to the plastic housing.
Figure 5-21 Connecting a sealing nut
Ensure that the sealing nut is secured.
Step 8 Insert the plugs into the FE ports on the Smart PCS and tighten the coupling nuts.
Figure 5-22 Connecting the FE communications cables
(1) White-and-
orange
(2) Orange (3) White-and-
green
(4) Blue
(5) White-and-blue (6) Green (7) White-and-
brown
(8) Brown
Step 9 When multiple Smart PCSs are connected in parallel, bind the FE communications
cables connecting to the SmartACU or SmartModule at proper positions near the
ports.
LUNA2000-200KTL-H1 Smart Power Control System
User Manual 5 Cable Connection
Issue 08 (2024-01-23) Copyright © Huawei Technologies Co., Ltd. 58
To Next Page
Loading...