Huawei LUNA2000-213KTL-H0 - Page 112

Table E-1 Paint repair description
Paint Damage Tool and
Material
Procedure Description
Slight scratch
(base material
not exposed)
Spray paint or
paint, brush
(required for
repainting a small
area), ne
sandpaper,
anhydrous
alcohol, cotton
cloth, and paint
sprayer (required
for repainting a
large area)
Steps 1, 2, and 4 1. The color
codes of the
top coat
(polyurethane
paint) are RAL
9003 (white)
and RAL 7035
(gray).
2. For a few
scratches,
smudges, or
rust, using a
spray paint or
brush is
recommended.
3. For many
scratches or
large-area
smudges and
rust, use a
paint sprayer.
4. The paint
coating shall
be thin and
even. Paint
drops are
prohibited on
the coating.
The surface
shall be
smooth.
5. Leave the
repainted area
for
approximately
30 minutes
before
performing any
further
operation.
Deep scratch
(primer damaged,
base material
exposed)
Spray paint or
paint, epoxy
micaceous iron
oxide paint, brush
(required for
repainting a small
area), ne
sandpaper,
anhydrous
alcohol, cotton
cloth, and paint
sprayer (required
for repainting a
large area)
Steps 1, 2, 3, and
4
LUNA2000-213KTL-H0 Smart Power Control System
User Manual E How Do I Repair Paint Damage?
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 105