Table E-2 Paint requirements
Item Requirement
Primer thickness 120 μm
Top coat thickness 60 μm
Primer type Epoxy micaceous iron oxide paint
Top coat type RAL 9003 and RAL 7035 polyurethane
top coat
Procedure
Step 1 Gently polish damaged areas using ne sandpaper to remove smudges or rust.
Figure E-1 Polishing a damaged area using sandpaper
Step 2 Dip a piece of cotton cloth into anhydrous alcohol and wipe the polished or
damaged area to remove the dirt and dust. Then wipe o the anhydrous alcohol
with a clean and dry cotton cloth
Figure E-2 Wiping a polished or damaged area using anhydrous alcohol
Step 3 Repair the primer (epoxy micaceous iron oxide primer).
1. Paint epoxy micaceous iron oxide primer on the damaged coat using a brush
or paint sprayer.
LUNA2000-213KTL-H0 Smart Power Control System
User Manual E How Do I Repair Paint Damage?
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 106
To Next Page
Loading...