Base Support
● The base support needs to be purchased separately from the Company.
● The dimensions (L x W x H) of the base support is 2380 mm x 916 mm x 450
mm.
● The base support weighs 110 kg.
Procedure
Step 1 Open the packing case and take out the base support.
1. Pull the lock tongues straight and remove the four-sided sealing plates and
top panel.
Figure 4-10 Removing the four-sided sealing plates and top panel
2. Remove the screws for securing the base support.
Figure 4-11 Removing screws
Step 2 Move the base support to the selected foundation.
● Four persons or appropriate transportation tools, such as forklift and crane, are
required to move the base support.
● The eye bolts are delivered with the base support. After the hoisting is
complete, remove and keep the eye bolts properly. The eye bolts might be
rusted if not removed.
LUNA2000-213KTL-H0 Smart Power Control System
User Manual 4 Installation
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 39
To Next Page
Loading...