Huawei SUN2000-3KTL-L1 User Manual

Table 5-1 Component description
No. Component Description Source
A PV string ● A PV string is
composed of the PV
modules connected in
series and works with
an optimizer.
● The SUN2000 supports
the input from two PV
strings.
Prepared by the
customer
B Smart PV optimizer The SUN2000-450W-P
smart PV optimizer is
supported.
Purchased from
Huawei
C DC switch Recommended: a DC
circuit breaker with a
rated voltage greater
than or equal to 600 V
DC and a rated current of
20 A
Prepared by the
customer
D Battery The SUN2000 can
connect to LUNA2000
batteries.
Purchased from
Huawei
The SUN2000 can
connect to LG-RESU
batteries (LG RESU7H and
RESU10H).
Prepared by the
customer
E Battery switch Recommended: a DC
circuit breaker with a
rated voltage greater
than or equal to 600 V
DC and a rated current of
20 A
Prepared by the
customer
F
Smart Dongle
a
Supported models:
● WLAN-FE Smart
Dongle: SDongleA-05
● 4G Smart Dongle:
SDongleA-03
Purchased from
Huawei
G
Smart Power Sensor
b
The SUN2000 can
connect to the DTSU666-
HW
c
, YDS60-80
d
, YDS70-
C16
e
, DDSU666-H, and
DTSU666-H smart power
sensors.
Purchased from
Huawei
SUN2000-(2KTL-6KTL)-L1
User Manual 5 Electrical Connection
Issue 10 (2023-02-13) Copyright © Huawei Technologies Co., Ltd. 39

Huawei SUN2000-3KTL-L1 Specifications

General

Max. efficiency	98.4%
Max. input voltage	600 V
Nominal output power	3000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Operating temperature range	-25°C to +60°C
Nominal AC voltage	220 V / 230 V / 240 V
MPPT voltage range	90 V - 560 V
Rated input voltage	360 V
Number of MPPTs	2
Cooling	Natural Convection
Protection degree	IP65
Rated output voltage	220 V / 230 V / 240 V
Output frequency	50 Hz / 60 Hz
Power factor	0.8 leading ... 0.8 lagging
THDi	<3%
Efficiency	98.4%
Warranty	10 years
Max. apparent AC power	3300 VA
Max. output power	3300 W